No Ads

Mornsun LM200-12B05 AC/DC 200W Enclosed Switching Power Supply

Product ID: FAERI-02462

Mornsun LM200-12B05 AC/DC 200W Enclosed Switching Power Supply The LM200-12B05 is an enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage of 90-264VAC, 50/60Hz, and can output a constant 12V DC at up to 150W. The power supply is also equipped with short…

₹3,174.60

Price excludes GST. +18% GST (₹571.43/unit) is added at checkout. Shipping charged separately — based on the order’s quantity & size.

In stock

  • Cash on Delivery available
  • Ships within 24–48 hours
  • Backed by FAERI maker support
No Ads

Product details

Mornsun LM200-12B05 AC/DC 200W Enclosed Switching Power Supply

The LM200-12B05 is an enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage of 90-264VAC, 50/60Hz, and can output a constant 12V DC at up to 150W. The power supply is also equipped with short circuit, over voltage, over current, and over temperature protection.

Features:

• Universal input voltage: 90-264VAC, 50/60Hz

• Output voltage: 12V DC

• Output current: 150W

• Short circuit protection

• Over voltage protection

• Over current protection

• Over temperature protection

check out : Mornsun LM150-23B36 AC/DC 150W Enclosed Switching Power Supply

Note:

• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load

• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m

• All index testing methods in this datasheet are based on our company's corporate standards

• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability

• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating

• The output voltage can be adjusted by the ADJ, clockwise to increase

• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units

• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment

You may also like