No Ads

Mornsun LM350-22B24R2 AC/DC 350W Enclosed SMPS

Product ID: FAERI-02573

Mornsun LM350-22B24R2 AC/DC 350W Enclosed SMPS The LM350-22B24R2 is a 350W enclosed AC/DC power supply from Mornsun. It has a universal AC input of 176-264VAC or 240-370VDC, and a single output of 24V at 14.6A. The efficiency of the power supply is up to 88%, and it has a low no-load power…

₹3,744.40

Price excludes GST. +18% GST (₹673.99/unit) is added at checkout. Shipping charged separately — based on the order’s quantity & size.

In stock

  • Cash on Delivery available
  • Ships within 24–48 hours
  • Backed by FAERI maker support
No Ads

Product details

Mornsun LM350-22B24R2 AC/DC 350W Enclosed SMPS

The LM350-22B24R2 is a 350W enclosed AC/DC power supply from Mornsun. It has a universal AC input of 176-264VAC or 240-370VDC, and a single output of 24V at 14.6A. The efficiency of the power supply is up to 88%, and it has a low no-load power consumption of <0.5W. The power supply is also certified to meet the following standards:

• IEC/EN61000-4

• CISPR32/EN55032

• UL/EN/IEC/BS EN62368

• EN/IEC60335

• EN651558

• EN62477

• GB4943

The LM350-22B24R2 is suitable for a wide range of applications, including industrial control, LED lighting, and telecommunications.

check out : Mornsun LM350-22B15R2 AC/DC 350W Enclosed SMPS

Note:

• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load

• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m

• All index testing methods in this datasheet are based on our company's corporate standards

• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability

• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating

• The output voltage can be adjusted by the ADJ, clockwise to increase

• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units

• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment