Product details
Mornsun LM75-22B36 AC/DC 75W Enclosed Switching Power Supply
The LM75-22B36 is a universal input, enclosed, switching power supply (SMPS) that provides 75 watts of output power at 36 volts DC. It has a universal input voltage range of 90 to 264 VAC and a power factor correction (PFC) efficiency of up to 90%. The LM75-22B36 is also equipped with a number of safety features, including overvoltage protection, overcurrent protection, and short circuit protection.
Features:
• Universal input voltage range of 90 to 264 VAC
• Output voltage of 36 volts DC
• Output current of 2.1 amps
• Power output of 75 watts
• Power factor correction (PFC) efficiency of up to 90%
• Overvoltage protection
• Overcurrent protection
• Short circuit protection
Note:
• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
• All index testing methods in this datasheet are based on our company's corporate standards
• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
• The output voltage can be adjusted by the ADJ, clockwise to increase
• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment
The LM75-22B36 is a universal input, enclosed, switching power supply (SMPS) that provides 75 watts of output power at 36 volts DC. It has a universal input voltage range of 90 to 264 VAC and a power factor correction (PFC) efficiency of up to 90%. The LM75-22B36 is also equipped with a number of safety features, including overvoltage protection, overcurrent protection, and short circuit protection.
Features:
• Universal input voltage range of 90 to 264 VAC
• Output voltage of 36 volts DC
• Output current of 2.1 amps
• Power output of 75 watts
• Power factor correction (PFC) efficiency of up to 90%
• Overvoltage protection
• Overcurrent protection
• Short circuit protection
Note:
• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
• All index testing methods in this datasheet are based on our company's corporate standards
• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
• The output voltage can be adjusted by the ADJ, clockwise to increase
• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment
