Product details
Mornsun LM100-23B15 AC/DC 100W Enclosed Switching Power Supply
LM100-23B15 is a 15V, 105W enclosed AC/DC converter from Mornsun. It has a wide input voltage range of 85 to 305VAC or 120 to 431VDC, making it suitable for use in a variety of applications. The converter is also protected against overvoltage, overcurrent, and short circuit, ensuring safe operation.
Features:
• 15V, 105W output
• Wide input voltage range: 85 to 305VAC or 120 to 431VDC
• Overvoltage, overcurrent, and short circuit protection
• Enclosed housing for safety and protection
• Built-in thermal shutdown
• Ripple and noise suppression
Note:
• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
• All index testing methods in this datasheet are based on our company's corporate standards
• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
• The output voltage can be adjusted by the ADJ, clockwise to increase
• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment
LM100-23B15 is a 15V, 105W enclosed AC/DC converter from Mornsun. It has a wide input voltage range of 85 to 305VAC or 120 to 431VDC, making it suitable for use in a variety of applications. The converter is also protected against overvoltage, overcurrent, and short circuit, ensuring safe operation.
Features:
• 15V, 105W output
• Wide input voltage range: 85 to 305VAC or 120 to 431VDC
• Overvoltage, overcurrent, and short circuit protection
• Enclosed housing for safety and protection
• Built-in thermal shutdown
• Ripple and noise suppression
Note:
• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
• All index testing methods in this datasheet are based on our company's corporate standards
• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
• The output voltage can be adjusted by the ADJ, clockwise to increase
• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
• The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment
